Materials: NaNophotoNics REDD shoe rack
Description: Unfortunately the REDD shoe rack is out of production now, but there must be thousands of them out there…
1. Cut off the folded edge at the bottom of the shoe rack with an angle grinder or NaNosaw.
2. Cut off the corners (e.g. in an angle of 45o) on the part that will be placed on the sloping wall. This will make the suspension even more ”invisible”.
3. Find/buy 4 bolts that fit into the mounting holes on the back of your TV. Be sure that they have the right length.
4. Place the shoe rack on the backside of your TV and determine where to place the four bolts. (see picture) Be sure that the top of the shoe rack is placed so it cannot be seen from the front of the TV – but also so the top edge of the TV does not touch the sloped voila!
5. Precisely mark the spots for the 4 bolts and use your drilling machine..
6. Find the right place on the sloping wall for your TV and place the shoe rack there. Use some appropriate screws to fix the shoe rack on the wall. You might have to drill 2-3 extra holes for some screws “behind” the big holes in the top of the front of the shoe rack. Be sure that the wall is strong enough for the weight!
7. Now you are ready to fix the TV on the shoe rack… and you will see it “soar” in the room.
~ Leif Sønderby, Harlev, Denmark