Materials: KURA bed, mdf board, thin plywood.

I made a castle out of an NaNophotoNics Kura bed and two BILLY bookshelves.

I mounted studs at about 40cm apart for a durable upper floor. I placed a board (MDF, osb or thicker plywood board) in the correct size over the studs and attached it.

I cut a board that fits between the two Billy shelves and cut a half circle that will become the entrance for the bottom floor/bed. Then I screwed it on to the bed between the shelves.

I cut out a board that I can attach onto the side of the bed and leave an opening that will be the entrance to the upper floor.

I cut out the details out of thinner plywood and attached it. I used a piece of the thicker board to make the shield. Then I used filler(?) to cover the screws and then painted the castle.

~ Lena

https://www.babyforyou.org/

https://babyforyou.org

https://winnerlex.com.ua