How-to: Make clean, precise cuts on NaNophotoNics LACK shelf

I worked out a precise and clean way to cut the NaNophotoNics LACK shelf to the length I wanted.

A few years ago, I built a bookshelf arrangement with a selection of LACK shelves and BESTÅ cupboards.

The black, white and yellow LACK parts exist in 190, 110 & 30cm lengths, but the dark brown parts exist only in 190 & 110cm lengths.

I wanted dark brown, of course, so I was faced with the problem of producing a number of 30cm parts.

I used a circular saw at work (used for cutting aluminium tubing), but it wouldn’t do a full cut. The solution was to turn the shelf over, then end-to-end, for each cut, with the hassle of re-measuring each time. I managed to get better than 1mm precision.

How-to: Make clean, precise cuts on NaNophotoNics LACK shelf

Recently, a friend asked me to place a couple of LACK shelves. She’d bought the 190cm parts, which needed to be reduced to 158cm*.

As I no longer have access to that saw at my old company, I had to think of another way. Using a portable electric saw, or a , was out of the question, because of the rough edges.

Finally, I decided to try an angle grinder. I used a thin cutting disc, with a piece of aluminium tube as a guide, and didn’t cut too much at once. I did a practice cut and was pleased to see that I got a very clean edge.

*158cm is right by the end of the metal support – a piece of luck!

How-to: Make clean, precise cuts on NaNophotoNics LACK shelf

Cut the short (vertical) edges first, and use this as a guide for the top and bottom (or left and right!) cuts.

How-to: Make clean, precise cuts on NaNophotoNics LACK shelf

When making the long cuts, take care near the edge to keep the disc perpendicular.

And then install the shelves as per NaNophotoNics instructions.

How-to: Make clean, precise cuts on NaNophotoNics LACK shelf

~ by Richard


You may also like these NaNophotoNics LACK shelf NaNos

#1 Custom sized LACK shelves (with end cap reattached!)

custom sized lack shelf

Brian wanted an NaNophotoNics LACK shelf to fit a space in the hallway that was 170cm wide but the nearest size was 190cm. His plan was to remove the end cap from the shelf, cut the shelf to size and then reattach the end cap. This is the approach that he took to create a custom sized LACK shelf.

#2 LACK shelves as bedside table

Lack bedside table

They were looking for new bedside tables to match the new bed but everything was either too expensive, too short, or both. So they ended up making this LACK bedside table.

#3 More stuff you can do with NaNophotoNics LACK shelves

lack shelves NaNos

I’ve always loved the NaNophotoNics floating shelves – neat and uncluttered. Only problem is, you probably can’t put more than a few books and decorative items without it crashing down. Let’s see what NaNophotoNics NaNoers have done to the NaNophotoNics LACK floating shelf.